Delivery forms and measurements

Compacfoam is delivered in the exact measurements requested by the customer. The cutting exact to mms due to smooth hot-wire cutting or exact plane-based calibration. In addition, blocks can be profiled to customers wishes using milling machines and taylored by saw.

We offer you Compacfoam in rods or bars, sheets or cube- or block forms.

Measurements

The measurement of Compacfoam products are derived fundamentally from the production process. Compacfoam is produced in blocks, which are cut into bars, sheets or cubes as needed. The higher the density category, the smaller the block that is originally produced. While the block lengths are considered the price-optimized standard lengths of the final products, the block breadth should rather be regarded as maximum dimension.

Compacfoam is not offered only in these standard sizes, however. At a surcharge smaller cutting can be delivered and also larger rods or sheets using thermal welding. Hence the previously mentioned maximum dimension only applies under certain conditions. When establishing measurements, the processing limits of milling or plane calibration as well as the transport factor must be taken into consideration.

Standard panel formats:

Material Class	Standard Length	x	Standard Width
CF100:	2,350 mm	x	780 mm
CF100:	2,350 mm	x	520 mm
CF125:	2,250 mm	x	760 mm
CF125:	2,250 mm	x	510 mm
CF150:	2,150 mm	x	680 mm
CF150:	2,150 mm	x	480 mm
CF200:	1,950 mm	x	660 mm
CF200:	1,950 mm	x	440 mm
CF300:	1,700 mm	x	600 mm *
CF300:	1,700 mm	x	400 mm
CF400:	1,600 mm	x	450 mm *
CF400:	1,600 mm	x	380 mm

*not available for thickness <40mm

Material Class	Half Standard Length	x	Standard Width
CF100:	1,175 mm	x	780 mm
CF100:	1,175 mm	x	520 mm
CF125:	1,125 mm	x	760 mm
CF125:	1,125 mm	x	510 mm
CF150:	1,075 mm	x	680 mm
CF150:	1,075 mm	x	480 mm
CF200:	970 mm	x	660 mm
CF200:	970 mm	x	440 mm
CF300:	850 mm	x	600 mm *
CF300:	850 mm	x	400 mm
CF400:	800 mm	x	450 mm *
CF400:	800 mm	x	380 mm

*not available for thickness <40mm

Economy	Standard length	x	Standard width
Full size:	2,350mm	x	1,160mm
Half size:	2,350 mm	x	580 mm
Quarter size:	1,160 mm	x	580 mm

Pallet quantities:

Due to Compacfoam's manufacturing process you can order mixed panel thicknesses without extra costs. In case of sorted panels, the quantity/pallet would be as follows:

Material class CF100 to CF200

10 mm	20 mm	30 mm	40 mm	50 mm	60 mm	70 mm	80 mm	90 mm	100 mm
150 pc.	75 pc.	50 pc.	38 pc.	30 pc.	25 pc.	21 pc.	20 pc.	16 pc.	15 pc.

Material Class CF300 and CF400

10 mm	20 mm	30 mm	40 mm	50 mm	60 mm	70 mm	80 mm	90 mm	100 mm
150 pc.	75 pc.	74 pc.	56 pc.	45 pc.	37 pc.	30 pc.	29 pc.	25 pc.	21 pc.

links:
Hot-wire cutting
Plane calibration
Milling
Sawing Compacfoam
Delivery forms and measurements
Processing options